How to Root Galaxy S3 Mini I8190 / I8190N / I8190L / I8190T

 

- STEP BY STEP rooting manual

I have some good news today.
Official recovery files from CWD i found.

What we have?
Simple, now we hav easy and fast way for root any I8190 L, I, T, N Galaxy S3 Mini.
Just Follow Manual now.

1. Step

- Download Samsung USB drivers ----> Click HERE
- Download ODIN 3.04 from ----> Click HERE
- Download recovery-clockwork-touch-6.0.2.7-golden.tar.md5.zip recovery image from here ------> Click HERE!
- Download SuperSu Last version ----> Click HERE

2. Step
- Turn off phone, then switch to download mode:
press together [volume down]+[home button]+[power button] (all at once),
press [volume up] for comfirm download mode.
- Connect usb cable, install drivers.

3. Step

- Run Odin 3.04, ticked 2 option F.reset times+auto reboot,
- Extract ecovery-clockwork-touch-6.0.2.7-golden.tar.md5.zip !Select PDA and browse to where you have extracted ecovery-clockwork-touch-6.0.2.7-golden.tar.md5
and select it

4. Step

- Odin should show device under 1 of ID:COM port.(if this not happends repeat from STEP 2)
- Press START.
- Phone should power on after flashing complete.


5. Step - ROOTING:

- Copy Downloaded SUperSU to externel sdcard (NOT INTERNAL ! )
- Power off your phone, after press [Vol up] + [Power] + [Home button] (all at once)
- Select Install zip from sdcard --->choose zip from sdcard ---> scroll to and open folder where located UPDATE-SuperSU-v1.05.zip-> choise UPDATE-SuperSU-v1.05.zip->
comfirm - YES - Install Update UPDATE-SuperSU-v1.05.zip.

Done ! And you are ready to go

thanks goes to chotu.

You can also use old method for root i8190 - prerooted firmware.
After few days i will update thread and will add link for prerooted Firmware.
i8190 prerooted - will be HERE.
i8190 prerooted - will be HERE.

Firmware details

PDA: P3100XXDMB1

CSC: P3100ITVDMB1

Version: Android 4.1.2

Built date: February, 2013

Galaxy Tab 2 7.0 users, who have already upgraded their devices with the latest official release, may follow our step-by-step guide below to root the same. The root method uses CF-Auto-Root files released by XDA developer, Chainfire. It should be noted that the root file does not install ClockworkMod (CWM) recovery but installs SuperSU and root binary only.

IBTimes UK reminds its readers that it will not be held responsible for any damage to the device. Before proceeding, users are advised to ensure that their Galaxy tablets meet the requirement below.

Pre-requisites

1) Install USB Drivers for Samsung Galaxy Tab 2 7.0 on the computer to connect the Android device with the computer.

2) Enable USB Debugging Mode on the tablet to connect it with the computer and use Android SDK with it. [Press Menu>> Settings>> Applications. From there navigate and click on Development option and ensure the USB Debugging Mode is turned on.]

3) Create back-up for all the data of the device. If the device is having custom recovery such as ClockworkMod/TWRP installed already then backup all the data using the same since it create a complete image of the existing tablet set up.

4) The tablet should have above 80 per cent of charge.

5) The Galaxy Tab should be factory unlocked and not locked to a particular carrier.

6) The rooting package used in the tutorial works only with Samsung Galaxy Tab 2 7.0 P3100, applying this on any other variant might brick the device. Therefore, verify the model number of the device by navigating to Settings>> About Tablet.

7) Rooting the tablet will void manufacturer's warranty. However, users can regain the warranty by unrooting the device.

Steps to root Samsung Galaxy Tab 2 7.0 P3100 on Android 4.1.2 XXDMB1 Jelly Bean

1) Download CF-Auto-Root package for Samsung Galaxy Tab 2 7.0 to the computer then extract the downloaded zip file

2) Download Odin v1.85 which will help to root the XXDMB1 Jelly Bean firmware

3) Power off the tablet and boot the device into Download Mode. Press and hold the Volume Up and then press the Power buttons together until the construction Android robot and a triangle appears on the screen of the tablet. Now press the Power button again to confirm to enter into Download Mode

4) Open Odin on the computer

5) Plug in the USB cable to the tablet to connect it with the computer. When the tablet is connected successfully, one of the ID: COM boxes will turn yellow with the COM port number. This step will take some time

6) Now in Odin, click on 'PDA' button and select the 'CF-Auto-Root-espressorf-espressorfxx-gtp3100.zip' file, which was extracted in step-1

7) Verify that the Auto Reboot and F.Reset Time options are selected in Odin

8) Double check everything and click the 'Start' button in Odin. The installation process will begin now and would take about a few minutes to complete

9) Once the installation process is completed, the tablet will reboot into Recovery Mode automatically. The ID: COM box will also turn green.

10) When the home screen is seen, unplug the USB cable from tablet to disconnect it from the computer

Troubleshooting issues

Sometimes the device does not boot into Recovery Mode automatically and root the device. If that happens, then perform the tutorial from the beginning. If that does not work too then again perform the tutorial but ensure that the Auto Reboot option in Odin is not checked. Then after step-9 follow the below mentioned instructions

a) Pull out the battery from the tablet or keep holding the Power button to switch off the tablet forcefully

b) Now boot the device into Recovery Mode by pressing and holding the Volume Down and Power buttons together. This will start the installation process to root the tablet

Samsung Galaxy Tab 2 7.0 P3100 running on official Android 4.1.2 XXDMB1 Jelly Bean is now rooted successfully. Open the app drawer of the tablet and check for an app called SuperSU from the list. Additionally, to ensure that the root method is installed and working properly, download an app called Root Checker from Google Play Store.

Dans ce tutoriel je vais vous montrer comment rooter votre Samsung Galaxy S3 i9300 avec le kernel Cf-root, je tiens à vous informer que cette installation ajoute aussi l'application CWM Manager et ClockworkMod Recovery.

Attention: cette opération peut comporter des risques, veuillez suivre attentivement ce tutoriel et pensez à faire une sauvegarde NAND de votre ROM actuelle "effectuer-un-nandroid-backup-avec-cwm" avant d'installer ce CF-root galaxy S3.

Ce dont vous aurez besoin pour installer le Cf-root sur votre galaxy S3

• Avoir installé les drivers USB de votre galaxy s3 i9300, si ce n'est pas le cas, installez Samsung Kies ou sans Kies ici "Drivers-Galaxy-SIII-Mini-sans-Kies".


• Téléchargez et dézippez le fichier "Odin3-v1.85.zip" l'outil pour installer le cfroot.


• Téléchargez et dézippez le fichier du Cf-root pour votre Galaxy S3 "CF-Root-SGS3-v6.4.zip" ou via "ce lien".

Installer le CFRoot sur votre Galaxy S3 I9300

1. Lancez l'application "Odin3 v1.85.exe" puis placez le fichier "CF-Root-SGS3-v6.4.tar" dans l'onglet "PDA".


2. Éteignez complètement votre mobile.


3. Maintenez les boutons "volume bas + home + power" enfoncé pour arriver au mode download.


4. Connectez votre mobile à votre PC via le câble USB puis vérifiez si la case ODIN est devenue jaune avec un message "0:[COMX]" ce qui signifie que votre Galaxy s3 est bien reconnu par ODIN.


5. Les cases "Auto Reboot" et "F. Reset Time" doivent être cochées.


6. Ne pas cocher la case "Re-partition".


7. Cliquez sur "Start" pour commencer l'installation du CF-Root.


8. Une fois l'installation est terminée, votre mobile va redémarrer tout seul.

Voilà votre Samsung Galaxy s3 i9300 est maintenant rooté et avec CWM installé.