How to Root Galaxy S3 Mini I8190 / I8190N / I8190L / I8190T

 

- STEP BY STEP rooting manual

I have some good news today.
Official recovery files from CWD i found.

What we have?
Simple, now we hav easy and fast way for root any I8190 L, I, T, N Galaxy S3 Mini.
Just Follow Manual now.

1. Step

- Download Samsung USB drivers ----> Click HERE
- Download ODIN 3.04 from ----> Click HERE
- Download recovery-clockwork-touch-6.0.2.7-golden.tar.md5.zip recovery image from here ------> Click HERE!
- Download SuperSu Last version ----> Click HERE

2. Step
- Turn off phone, then switch to download mode:
press together [volume down]+[home button]+[power button] (all at once),
press [volume up] for comfirm download mode.
- Connect usb cable, install drivers.

3. Step

- Run Odin 3.04, ticked 2 option F.reset times+auto reboot,
- Extract ecovery-clockwork-touch-6.0.2.7-golden.tar.md5.zip !Select PDA and browse to where you have extracted ecovery-clockwork-touch-6.0.2.7-golden.tar.md5
and select it

4. Step

- Odin should show device under 1 of ID:COM port.(if this not happends repeat from STEP 2)
- Press START.
- Phone should power on after flashing complete.


5. Step - ROOTING:

- Copy Downloaded SUperSU to externel sdcard (NOT INTERNAL ! )
- Power off your phone, after press [Vol up] + [Power] + [Home button] (all at once)
- Select Install zip from sdcard --->choose zip from sdcard ---> scroll to and open folder where located UPDATE-SuperSU-v1.05.zip-> choise UPDATE-SuperSU-v1.05.zip->
comfirm - YES - Install Update UPDATE-SuperSU-v1.05.zip.

Done ! And you are ready to go

thanks goes to chotu.

You can also use old method for root i8190 - prerooted firmware.
After few days i will update thread and will add link for prerooted Firmware.
i8190 prerooted - will be HERE.
i8190 prerooted - will be HERE.

INTRODUCING THE SAMSUNG GALAXY S3 MINI TOOLKIT

IMPORTANT: THIS TOOLKIT SUPPORTS 4 DIFFERENT S3 MINI VARIANTS SO MAKE SURE YOU SELECT THE CORRECT MODEL FOR YOUR DEVICE IN THE MODEL SELECTION SCREEN OR INCORRECT BOOT IMAGES WILL BE DOWNLOADED WHICH COULD SOFT BRICK YOUR DEVICE.

FUNCTIONS OF SAMSUNG GALAXY S3 MINI TOOLKIT V1.1

• Install drivers automatically


• Backup/Restore a single package or all apps, user data and Internal Storage


• Backup your /data/media (virtual SD Card) to your PC for a Full Safe backup of data


• Perform a FULL NANDROID Backup of your system via adb and save in Custom Recovery format on your PC


• Pull /data and /system folders, compress to a .tar file and save to your PC


• Auto Update ToolKit to latest push version on startup (donator feature)


• Dump selected Phone Partitions, compress to a .zip file with md5 and save to your PC


• Install BusyBox binary on phone


• Root any public build INCLUDING JELLY BEAN (different options available)


• [B]Root with Superuser (ChainsDD) or SuperSU (Chainfire) via CWM (works on ANY build)


• Install any zip file via Sideload feature in Recovery


• Flash CWM Touch Recovery (thanks to clockworkmod team) or TWRP Recovery (thanks to twrp team)


• Rename Recovery Restore files if present


• Flash Insecure Boot Image for adb mode


• Flash Stock Boot Image back to your phone


• Create tar file to flash via Odin with 1-click process


• Download, Extract and Flash Stock Rom (full DETAILED steps) ESSENTIAL FOR WARRANTY RETURNS


• Rip cache.img to zip file in CWM format for editing and flashing (thanks to Adam Lange)


• Install a single apk or multiple apk's to your phone


• Push Files from your PC to your phone


• Pull Files from your phone to your PC


• Set Files Permissions on your phone


• Dump selected LogCat buffers to your PC


• Dump BugReport to your PC (if installed)


• Help, Information Screen for various tasks


• Mods Section to Modify your phone


• Reboot Phone options in adb mode


• Change background, text colour in ToolKit


• Activate Professional version and enable Donator features from within the ToolKit

--------------------------------------------------------------

**CLICK HERE TO DOWNLOAD THE SAMSUNG GALAXY S3 MINI TOOLKIT V1.1**
INCLUDES MODSSECTION V1.1 WITH 3-BUTTON RECOVERY FIX

NOTE: As the exe files are not Digitally Signed with a Microsoft Certificate they 'may' get picked up as potentially harmful by Antivirus Programs and deleted on first run. If this happens restore the file and exclude it from future scans to use it. This seems to happen mostly on AVG Free and Norton which is why I switched to BitDefender which is much better.

IMPORTANT: ONLY FLASH ROMS THAT ARE SPECIFICALLY MADE FOR YOUR PHONES MODEL NUMBER AS FLASHING AN INCORRECT ROM CAN POTENTIALLY BRICK YOUR DEVICE!

--------------------------------------------------------------

WHAT IS THE DIFFERENCE BETWEEN FREE (PUBLIC) AND DONATE (PROFESSIONAL) VERSIONS?
THE FREE PUBLIC VERSION OF THE TOOLKIT INCLUDES EVERYTHING YOU COULD POSSIBLY NEED TO MANIPULATE YOUR PHONE. NOTHING IS RESTRICTED. ACTIVATING THE DONATE VERSION WILL ADD THE ABILITY TO CHECK FOR UPDATES VIA THE TOOLKIT AND HAVE THEM PUSHED TO YOUR PC RIGHT AWAY AS SOON AS THEY ARE UPLOADED TO MY SERVER WITHOUT NEEDING TO DOWNLOAD THE WHOLE TOOLKIT EVERY TIME. THIS ALSO MEANS SMALLER UPDATES CAN BE SENT OUT MORE FREQUENTLY SUCH AS ADDING A SINGLE FUNCTION, FIXING A BUG OR ADDING COMPATIBILITY FOR A SINGLE VARIANT OR CARRIER SO DONATOR VERSIONS WILL BE UPDATED SOONER. IF YOU ARE NOT ABLE TO, OR DO NOT WANT THE AUTO UPDATE FEATURE THEN ALL UPDATES WILL BE COMPILED AND RELEASED TO THE XDA COMMUNITY AS A FULL DOWNLOAD VERSION AS SOON AS TIME ALLOWS AND THERE ARE ENOUGH UPDATES TO WARRANT IT. DONATORS WILL ALSO HAVE THE QUICK PICKS AND EXTRAS SECTIONS UNLOCKED AND THE 'NAG' SCREEN ON EXIT WILL BE DISABLED. NEW DONATOR FEATURES WILL ALSO BE ADDED TO THE TOOLKIT IN THE FUTURE.

AUTO REPLY LINKS FOR PAYPAL AND GOOGLE CHECKOUT TO GET A CODE INSTANTLY CAN BE FOUND AT http://goo.gl/nyGqv

AUTO UPDATES ARE BY FAR THE EASIEST WAY TO KEEP THE TOOLKITS UP TO DATE AS I HAVE LOTS OF OTHER TOOLKITS TO LOOK AFTER. IF ANYONE HAS ANY VIEWS ON THIS PLEASE PM ME OR CONTACT ME AT TOOLKIT.SUPPORT@SKIPSOFT.NET. PLEASE DO NOT POST YOUR VIEWS IN THIS THREAD AS I WANT TO KEEP IT CLEAN FOR USER SUPPORT.

(Changelog at the Bottom of Post#1)













PLEASE READ THE *FAQ* IN POST#2 BEFORE ASKING QUESTIONS

--------------------------------------------------------------

2. USING MSKIPS' SAMSUNG GALAXY S3 MINI TOOLKIT

a. Download the Samsung Galaxy S3 Mini ToolKit package and run to install the ToolKit to your PC. The installation will also create a Shortcut on your desktop for easy access. You have the option to include or exclude the drivers files at installation so if you already have your drivers set up and are just updating the ToolKit then you can untick the drivers if you wish.

b. Once the ToolKit is installed make sure your phone is booted and plugged in via USB cable and double click on the 'Samsung GS3 Mini ToolKit' shortcut on your desktop to run it.

c. You will be asked if you want to check for an Update. If you type 'yes' this will download and check the latest version numbers against the versions in the ToolKit. If there is an update available then you will have the option to download and install it (donator feature).

d. You will now be presented with a Model Selection Screen to choose the Model/Build that you are currently on. Type the number that corresponds to your desired selection. For example type '12' for INTERNATIONAL GSM MODEL [GT-I8190] 4.1.2 AMA1-AMB3 build. If you cannot find the build your device is using then type 'h' to select the HELP option to get more info.

NOTE: If you have a new build that isnt covered by the Toolkit you can also type 'a' in the Model Selection screen to see instructions on how to pull your stock image and send it to firmware.support@skipsoft.net so support can be added.

e. The Toolkit will now locate and download the boot image pack for your chosen Model. This is a new feature so the Toolkit is not limited to how many Models can be added and it cuts down ALLOT on the download size. After the zip file has finished downloading it will be extracted to the correct folders and the files checked to make sure everything is ok.

f. When you enter the Main Menu you will see 'Adb Mode' at the top. If you have installed your drivers correctly then you will see your devices serial number under the text with 'device' next to it. If you see this then your device is connected and you can carry on.

NOTE: If you haven't installed the drivers and don't see a serial number at the top then this is the FIRST thing you want to do so the Toolkit can operate properly.

g. Each option in the ToolKit has full information on what it is and how to use it.

--------------------------------------------------------------

1. INSTALLING SAMSUNG DRIVERS

The first thing you need to do is to install the drivers. These are needed so that you can communicate with the phone via the PC and perform the tasks that the ToolKit offers.

NOTE: If you have Kies installed then it is advisable to uninstall it first to avoid conflicts.

a. Make sure your device is booted into Android and the USB cable is unplugged.

b. Select Option 1 in the ToolKit to install the Samsung USB Driver pack. This should install all the neccessary drivers you need.

C. While the drivers are installing make sure that USB Debugging is enabled on your device via the Settings, Developer options Screen.

d. After the drivers have been installed connect the USB cable and the PC should detect the device and install the correct drivers. This will also happen when you enter Download Mode and Recovery Mode for the first time.

e. If you want to check the drivers then go to your Control Panel on your PC and open the Device Manager. With the USB cable connected you should see a device listed as 'Samsung Android Phone' or something similar and a driver attached to it.

--------------------------------------------------------------

3. FLASHING A ROM, RADIO, KERNEL OR ZIP FILE VIA CWM TOUCH RECOVERY

a. Download your chosen Rom, Radio or Kernel from the Development Forum, then make sure your phone is booted up as normal and connect your usb cable so it goes into MTP Mode. Copy the .zip file (DO NOT UNZIP IT FIRST) to the 'Internal Storage' part on your phone. Do not copy it to a Sub Directory as it will be harder to find when flashing it.

b. Enter CWM Touch Recovery (shut down the phone then hold down the 'HOME' + 'VOLUME UP' buttons and press the 'POWER' button for about 5 seconds).

c. Select 'Install zip from sdcard' and select 'choose zip from sdcard' if the file is on Internal Memory.

d. Scroll to your zip file and select. Then select 'Yes' in the list to start flashing.

e. When flashing is finished press the BACK Button to go back until you get to the Main Menu and then select 'reboot system now' to reboot your phone into Android.

--------------------------------------------------------------

3. FLASHING A ROM, RADIO, KERNEL OR ZIP FILE VIA TWRP TOUCH RECOVERY

a. Download your chosen Rom, Radio or Kernel from the Development Forum, then make sure your phone is booted up as normal and connect your usb cable so it goes into MTP Mode. Copy the .zip file (DO NOT UNZIP IT FIRST) to the 'Internal Storage' part on your phone. Do not copy it to a Sub Directory as it will be harder to find when flashing it.

b. Enter TWRP Touch Recovery (shut down the phone then hold down the 'HOME' + 'VOLUME UP' buttons and press the 'POWER' button for about 5 seconds).

c. Select 'Install' and select your file from the list if the file is on Internal Memory (for External Memory select it at the top).

d. Swipe your finger from left to right at the bottom to confirm the flash.

e. When flashing is finished select Reboot System or go back to Home for more options.
--------------------------------------------------------------

4. FLASHING A ROM, RADIO OR KERNEL VIA DOWNLOAD MODE USING ODIN

Odin can be used to flash image files or parts of your phone. You can flash something as simple as a boot image or a complete system. Everything is packed in a tar or tar.md5 file on your PC and flashed via Odin which is a Windows OS program.

a. Make sure you have your tar file stored on your PC.

b. Reboot your phone to Download Mode [shut down your phone, then hold down the Home + Volume DOWN Buttons and press the Power Button for about 2 seconds until a Warning screen appears. Press Volume UP to continue to Download Mode.

c. Connect your phone via usb and the first box at the top under ID:COM should turn blue and have some text in it. If you are using Download Mode on your phone for the first time then you will notice drivers being installed to use it.

d. The site or page you downloaded the file from will usually give you instructions to set Odin but if not you want to load boot/recovery/system files to the PDA location and have 'Auto Reboot' and 'F.Reset Time' ticked and nothing else.

e. Click on 'Start' to start the flash. You can see what is happening in the text box in the lower left.

--------------------------------------------------------------

USEFUL INFORMATION

How to get into Recovery Mode (if 3 button mod has been applied)
1. Unplug the USB cable.
2. Shut down the phone.
3. Hold down the 'HOME' + 'VOLUME UP' buttons and press the 'POWER' button for about 5 seconds to enter Recovery Mode.
Note: If you cannot get into Recovery by using the buttons then you can reboot to it from the Toolkit 'reboot device' section.

How to get into Download Mode (For Odin)
1. Unplug the USB cable.
2. Shut down the phone.
3. Hold down the 'HOME' + 'VOLUME DOWN' buttons and press the 'POWER' button for about 2 seconds until a WARNING! Screen appears. Press the 'VOLUME UP' button to enter Download Mode.

--------------------------------------------------------------

ToolKit v1.1 (13th March 2013)
+Added Stock Recovery image and enabled option in the Main Menu
+Repacked/readded 3button mod to fix problems some people had flashing it
+Fixed a few small bugs in main code

ToolKit v1.0.0 (12th March 2013)
+Initial public release

--------------------------------------------------------------
*DISCLAIMER*

I take no responsibility for any fault or damage caused by any procedures within this guide. No warranties of any kind are given.