How to Root Galaxy S3 Mini I8190 / I8190N / I8190L / I8190T

1. Step

- Download Samsung USB drivers ----> Click HERE
- Download ODIN 3.04 from ----> Click HERE
- Download recovery-clockwork-touch-6.0.2.7-golden.tar.md5.zip recovery image from here ------> Click HERE!
- Download SuperSu Last version ----> Click HERE

Dev-Host - Root and Recovery for ATT-TMO GS4-CASUAL-R527b

How to hard reset Samsung Galaxy S4 [android]

• First of all, take all accessory backup before reset. There is no revert back once you reset S4


• Go to setting menu and open Accounts Option (In jelly bean firmware only)


• Go to Backup & Reset Option


• Here you will see Factory Reset button at the bottom. Just press it and confirm it.


• It will perform a restart on S4 and it may take upto 5 minutes to get it started automatically. Do not play with device during this period.

• Make sure battery is charged at least 50% before performing hard reset


• Remove battery & insert it back but don't start device


• Press both volume + and Volume - button same time and then press power button


• Do not release any button until you see recovery screen


• From recovery option select Wipe Data / Factory reset note, Here you can use volume - button to go up & down in the menu


• Click on Home button (Bottom Switch) when you selected Wipe Data / Factory Reset option


• It will perform a step and it may take upto 10 minutes to restart your device.

rooter le Samsung Galaxy S3 : Que ce soit pour installer des mods, d'autres roms, ou pour effectuer une sauvegarde de vos applications et autres sms, le root est indispensable. Voici comment procéder au root du Samsung Galaxy S3 i9300.

Avertissement

Le root comporte des risques, si vous ne suivez pas la procédure comme il faut, vous pouvez vous retrouver avec un téléphone inutilisable. De même, il n'y a normalement aucune perte de données avec cette méthode, mais la prudence étant mère de sûreté, sauvegardez toutes vos données au préalable. Ni Astucesinfo ni moi-même ne pourront être tenus responsables de quoi que ce soit.

Cette méthode est déstinée au Samsung Galaxy S3 GT-i9300 sous Android Jelly Bean 4.1 exclusivement.

Téléchargements

Odin 307

Le CF-Root 6.4 (le kernel avec les droits super-utilisateurs, ce qu'on appelle les droits "root")

Le root

1. Téléchargez puis décompressez Odin 307

2. Téléchargez puis décompressez le fichier CF-Root-SGS3-v6.4

3. Lancez Odin

4. Eteignez votre Galaxy S3 et rédemarrez le en mode Download (volume bas + power + bouton home pendant environ 10 secondes), puis confirmer en appuyant sur le bouton de volume haut

5. Branchez le à votre PC via USB, et attendez que Windows installe les drivers, une fois fait, Odin le reconnaîtra, et la case en haut à gauche deviendra bleue

6. Cliquez sur PDA, puis allez chercher le fichier CF-Root (attention, prenez bien le fichier décompressé, avec l'extension .tar)

7. Odin devrait maintenant ressembler à ceci, ne touchez à rien d'autre, ne cochez aucune autre case

8. Cliquez sur Start

9. Après quelques secondes, Odin affichera "Reset" en bleu, c'est alors au tour de votre S3 de travailler

Et voilà ! Votre Galaxy S3 est rooté, félicitations !

If you think your Samsung Galaxy S2 will remain with just Android 4.0.3 Ice Cream Sandwich XXLP6 firmware, then think again—a more up-to-date XXLPB firmware has been leaked and is ready to be installed on your mobile device.

The new firmware reportedly offers improved battery performance compared to earlier firmware and some bells and whistles such as 3D effects when overscrolling.

If you want to, you can try  upgrading your Galaxy S2 to XXLP6 firmware first, or jump right in and learn how to flash Android ICS build XXLPB firmware on your mobile phone.

Before you flash the update, make sure you create a backup of your mobile phone data. Flashing the update will wipe the data on your device. Keep in mind that system tools such as Samsung KIES, firewall programs, and antivirus software may interfere during the installation process. It will be wise to disable such software for the meantime while you update your phone. Lastly, you will need to download the following files to your computer:

• XXLPB firmware (I9100OXXLP5_OXX.rar, 336 MB)


• Odin v1.83


• Samsung USB Drivers (install the drivers on your computer) — 32-bit (x86) Windows or 64-bit (x64) Windows

If all are in place, let’s now proceed to flashing Android 4.0.3 ICS XXLPB firmware on your Samsung Galaxy S2.

Instructions

1. Extract the contents of I9100OXXLP5_OXX.rar to your computer. If prompted for a password, use “samfirmware.com” (without the quotes). You will extract 3 files:Make sure your phone is not connected to your PC.
   
   
   
   • GT-I9100-MULTI-CSC-OXXLP5_RST.tar
   
   
   • I9100_CODE_I9100XXLPB_CL99600_REV02_user_low_ship.tar
   
   
   • MODEM_I9100XXLPB_REV_02_CL1101286.tar
   
   
   
   




3. Turn your phone off and wait until it vibrates to confirm it is completely turned off.


4. Press and hold the Volume Down key, Home key, and Power button simultaneously until a “Warning” sign appears on the screen.


5. Press the Volume Up key to continue.  This will put the phone in Download mode.


6. Run “Odin3 v1.83.exe” on your computer.


7. Connect your device to the computer via USB cable. The word “Added!” will be displayed in Odin’s message box. If it doesn’t display anything in the message box, make sure you have installed the appropriate drivers for your device.


8. After successfully connecting your device to Odin, manually add the extracted files to their respective tabs as instructed below:Under “Option” in the Odin3 window, make sure there are check marks beside Auto Reboot and F. Reset Time.
   
   
   
   • Click the PDA tab and choose I9100_CODE_I9100XXLPB_CL99600_REV02_user_low_ship.tar
   
   
   • Click the Phone tab and choose MODEM_I9100XXLPB_REV_02_CL1101286.tar
   
   
   • Click the CSC Tab and choose  GT-I9100-MULTI-CSC-OXXLP5_RST.tar
   
   
   
   




10. Click the Start button in Odin3 to flash the XXLPB firmware on your Samsung Galaxy S2.

Your phone will automatically reboot once it is done flashing the firmware. When the Samsung logo appears on your phone screen, you can now safely unplug your device from the computer. The highlighted word “PASS!” will also appear on the upper-left most box of Odin3, which signals a successful update.

In Case Something Goes Wrong

1. Unplug your phone from the computer.


2. Close Odin3.


3. Remove the phone’s battery and re-insert it.


4. Reboot your phone into Download mode.


5. Repeat the installation process from step 6.

Congratulations! You have successfully updated your Samsung Galaxy S2 to Android 4.0.3 XXLPB firmware.