Astuces info | IPA ,APK, Android,Iphone,Ipad,Ipod: Jelly Bean

Affichage des articles dont le libellé est Jelly Bean. Afficher tous les articles

mercredi 10 juillet 2013

Android jelly bean sur galaxy s2

Je ne vais pas tergiverser pendant trois heures, ça fait tellement longtemps qu'on attends Jelly Bean (presque) officielle sur le Galaxy S2 que je vais vous donner la méthode maintenant, et on en discutera ensuite ! C'est ultra-simple, il vous faut un Galaxy S2, et des mains. Comme d'habitude, faites une backup. Avec cette ROM, vous perdrez probablement certaines de vos données personnelles. Mes photos sont restées, mais pas mes sms ni mes paramètres wifi. Avec la synchronisation Google ça limite la casse, mais faites un backup quand même. Avec CyanogenMod 9.1, toutes les données étaient restées.

L'installation (flashage) de ROMs customs comporte des risques, si vous ne suivez pas la procédure comme il faut, vous pouvez vous retrouver avec un téléphone inutilisable. De même, il n'y a normalement aucune perte de données avec cette méthode, mais la prudence étant mère de sûreté, sauvegardez toutes vos données au préalable. Ni AndroidPIT ni moi-même ne pourront être tenus responsables de quoi que ce soit.

Ce tutoriel est destiné au Samsung Galaxy S2 GT-i9100 exclusivement. Ce qu'il vous faut avant de commencer

- Le logiciel Odin 3.04 =>ICI
- La ROM Android 4.1 Jelly Bean pour le Galaxy S2 => ICI (le fichier fait 500+ Mega, donc ça peut vous prendre quelques bonnes minutes)

Let's go

1. Décompressez l'archive Odin304
2. Décompressez l'archive I9100XXLSJ_I9100OXXLS1_OXX
3. Lancez Odin
4. Eteignez votre smarpthone et redemarrez en mode download (Volume Bas + Home + Power jusqu'à arriver à l'écran "Downloading)
5. Branchez votre Galaxy S2 via USB à votre ordinateur
6. Attendez qu'Odin reconnaisse votre Android, un rectangle bleu apparaît alors.

Le rectangle, jaune sur certaines versions d'Odin, est ici bleu

7. On va maintenant indiquer le contenu à installer à Odin, que l'on a décompressé auparavant. Dans la partie PDA, allez chercher le fichier CODE_I9100XXLSJ.tar, dans la partie PHONE on mettra le fichier MODEM_I9100XXLS6.tar, et dans la partie CSC le fichier CSC_HOME_OXX_I9100OXXLS1.tar

Ne vous trompez pas de sens !

8. Verifiez tout, tout doit être coché comme sur les photos. RIEN D'AUTRE.
9. Cliquez sur Start, et lancez votre morceau préféré.

On peut suivre l'évolution sur Odin...

... et sur le Galaxy S2

10. Quand Odin vous affiche PASS! sur fond vert, c'est que c'est fini (vous vous en doutiez)

C'est bon, par Odin !

11. Attendez que votre Galaxy S2 finalise l'installation (5 minutes environ). L'écran Samsung reste affiché un bon moment, pas d'inquiétude c'est normal.

Le gros must de cette ROM, qui est en fait une fuite de l'Android 4.1 Jelly Bean qui devrait sortir bientôt pour le Galaxy S2 (ça fait longtemps que c'est bientôt, hein Samsung !) c'est qu'elle est "presque" officielle, et que l'on pourra appliquer la ROM officielle Samsung quand elle sortira.

Elle est pas belle la vie ? L'inconvénient, c'est que vous perdrez votre root. Enfin c'est refaisable rapidement... Un mot pour finir : Jelly Bean améliore grandement la fluidité votre smartphone par rapport à ICS.

Source : androidpit

jeudi 27 juin 2013

How to Root Samsung Galaxy S2 Skyrocket [I727UCMC1] Android 4.1.2 Update

Unknown 04:17 Update

How to Root Samsung Galaxy S2 Skyrocket [I727UCMC1] Android 4.1.2 Update

you already lose root on your Galaxy S2 Skyrocket after the Android 4.1.2 Jelly Bean update (I727UCMC1) and now wants to retrieve root, you can use the latest TWRP recovery and SuperSU to root your device. The process is the same as it goes from previous 4.0.4 ICS, you need to install the TWRP recovery through Odin and then simply install the SuperSU via recovery mode "install update zip" option.

Disclaimer: Rooting voids the warranty of your device. If you don't have any idea of the heck is this all about, then leave your device untouched. Proceed at your own risk!

Step 1: Grab the needed files
TWRP recovery: openrecovery-twrp-2.5.0.0-skyrocket.tar
SuperSU 1.2.5 SuperSU download

USB Driver - download (only needed if you don not have Kies installed in your computer)
Odin3_v3.07 - download

Step 2: Install TWRP recovery via Odin

Make sure the battery is fully charge

Run Odin downloader tool.

Reboot the phone into download mode - Turn it OFF. Then hold down both volume buttons and plug connect USB cable into your phone. (or hold volume down and power button). Press the volume up button when you see this menu.

Just be sure that Re-Partition is NOT checked. leave Auto reboot and F-Reset time checked by default.

Click the PDA button in Odin. Browse to the TWRP file "openrecovery-twrp-2.4.4.0-hercules.tar" you

downloaded and select it.

Now hit Start button and Odin will flash the recovery.

Once Odin has finished flashing you will see a green PASS.

Step 3: Install SuperSU and Gain Root

Copy the UPDATE-SuperSU-v1.25 in the root directory of your SDcard.

Reboot into recovery. Power off your phone. Hold both volume buttons and the power button at the same time. When the phone vibrates, let go of the power button but keep holding both volume buttons. In a few seconds you should be in the recovery menu.

Navigate to "Install Update from SD card"

Now look for the UPDATE-SuperSU-v1.25.zip. then install it.

Just follow the TWRP prompts.

Now your fully rooted.

This Samsung Galaxy S2 Skyrocket AT&T (SGH-I727) Android 4.1.2 Jelly Bean UCMC1 root method was originally posted by [forrest89sei] via XDA-developers original thread. Credits and thank's goes to him.

Does this root method perfectly works on your device or not? Share it to us

jeudi 30 mai 2013

How to Root Galaxy Tab 2 7.0 P3100 on Android 4.1.2 XXDMB1 Jelly Bean

Unknown 03:02 XXDMB1

Samsung has released Android 4.1.2 XXDMB1 Jelly Bean for Galaxy Tab 2 7.0 P3100.

Firmware details

PDA: P3100XXDMB1

CSC: P3100ITVDMB1

Version: Android 4.1.2

Built date: February, 2013

Galaxy Tab 2 7.0 users, who have already upgraded their devices with the latest official release, may follow our step-by-step guide below to root the same. The root method uses CF-Auto-Root files released by XDA developer, Chainfire. It should be noted that the root file does not install ClockworkMod (CWM) recovery but installs SuperSU and root binary only.

IBTimes UK reminds its readers that it will not be held responsible for any damage to the device. Before proceeding, users are advised to ensure that their Galaxy tablets meet the requirement below.

Pre-requisites

1) Install USB Drivers for Samsung Galaxy Tab 2 7.0 on the computer to connect the Android device with the computer.

2) Enable USB Debugging Mode on the tablet to connect it with the computer and use Android SDK with it. [Press Menu>> Settings>> Applications. From there navigate and click on Development option and ensure the USB Debugging Mode is turned on.]

3) Create back-up for all the data of the device. If the device is having custom recovery such as ClockworkMod/TWRP installed already then backup all the data using the same since it create a complete image of the existing tablet set up.

4) The tablet should have above 80 per cent of charge.

5) The Galaxy Tab should be factory unlocked and not locked to a particular carrier.

6) The rooting package used in the tutorial works only with Samsung Galaxy Tab 2 7.0 P3100, applying this on any other variant might brick the device. Therefore, verify the model number of the device by navigating to Settings>> About Tablet.

7) Rooting the tablet will void manufacturer's warranty. However, users can regain the warranty by unrooting the device.

Steps to root Samsung Galaxy Tab 2 7.0 P3100 on Android 4.1.2 XXDMB1 Jelly Bean

1) Download CF-Auto-Root package for Samsung Galaxy Tab 2 7.0 to the computer then extract the downloaded zip file

2) Download Odin v1.85 which will help to root the XXDMB1 Jelly Bean firmware

3) Power off the tablet and boot the device into Download Mode. Press and hold the Volume Up and then press the Power buttons together until the construction Android robot and a triangle appears on the screen of the tablet. Now press the Power button again to confirm to enter into Download Mode

4) Open Odin on the computer

5) Plug in the USB cable to the tablet to connect it with the computer. When the tablet is connected successfully, one of the ID: COM boxes will turn yellow with the COM port number. This step will take some time

6) Now in Odin, click on 'PDA' button and select the 'CF-Auto-Root-espressorf-espressorfxx-gtp3100.zip' file, which was extracted in step-1

7) Verify that the Auto Reboot and F.Reset Time options are selected in Odin

8) Double check everything and click the 'Start' button in Odin. The installation process will begin now and would take about a few minutes to complete

9) Once the installation process is completed, the tablet will reboot into Recovery Mode automatically. The ID: COM box will also turn green.

10) When the home screen is seen, unplug the USB cable from tablet to disconnect it from the computer

Troubleshooting issues

Sometimes the device does not boot into Recovery Mode automatically and root the device. If that happens, then perform the tutorial from the beginning. If that does not work too then again perform the tutorial but ensure that the Auto Reboot option in Odin is not checked. Then after step-9 follow the below mentioned instructions

a) Pull out the battery from the tablet or keep holding the Power button to switch off the tablet forcefully

b) Now boot the device into Recovery Mode by pressing and holding the Volume Down and Power buttons together. This will start the installation process to root the tablet

Samsung Galaxy Tab 2 7.0 P3100 running on official Android 4.1.2 XXDMB1 Jelly Bean is now rooted successfully. Open the app drawer of the tablet and check for an app called SuperSU from the list. Additionally, to ensure that the root method is installed and working properly, download an app called Root Checker from Google Play Store.

jeudi 9 mai 2013

Jelly Bean For Noir A8 - android

Unknown 08:30 telecharger Jelly Bean

QMobile A10 Noir - Jelly Bean Update 4.1.1

New Jelly Bean update for QMobile Noir A10 (14-03-2013)

Guys ! The Auto Rotate Issue Has Been Fixed in Jelly Bean Rom u Can Download it from the following link.
download :https://docs.google.com/file/d/0ByNS...it?usp=sharing

Quote:

Update Features:

Auto Rotate Issue Fixed
Jelly Bean 4.1.1 ROM
Rooted
Deodexed
Very fast and smooth.

How to install:

DO AT YOUR OWN RISK!!!

1. Reboot into cwm recovery if don't have cwm then install it first.
2. Wipe data/factory reset.
3. Wipe cache.
4. In mounts and storage select format system.
5. In advanced menu wipe dalvick cache.
6. Once all the wiping is done, select install zip from sd-card and select mobile_a10_jellybean.zip

Once complete reboot and enjoy!!!

QMobile Noir A10

How To Root QMobile A10 Noir

First of all Lets start with the root process.

1. Download the following file.
http://www.mediafire.com/?lwhknfmnc25nbc6

2. Enable USB Debugging on your device to do that goto Settings>Development>USB Debugging
3. Connect your device to any laptop/PC and http://www.droidiser.com/2012/11/how...y-android.html
4. Unzip the root tool downloaded above.

5. Change the Mode of your device from USB Storage to Media Device to proceed further.

6. Run the Runme.bat file as shown below.

7. A command prompt with green letters will come up on your screen.

8. Follow the onscreen instructions carefully. To start off, you willl need to type in a "1" and press enter.
Note: If you ever want to Unroot your QMobile A10, follow the above steps till you reach this one and then, instead of typing "1", type "x" and hit enter. Follow the instructions that appear on the command prompt after that.

9. Your device will reboot during the process after which Bin4ry will copy some files to your device.

10. When the green letters in the command prompt says Have Fun!, then... Have fun.
That means, your device is rooted now and you can enjoy Superuser permissions!

Install CWM Recovery on QMobile Noir A10

1. Download cwm recovery from the given link cwm_Recovery_QMobile_Noir_A10

2. Extract it, rename it to recovery.img & transfer it to the root of your SD Card.

3. Download and install MobileUncle MTK Tools from Google Play Store and run it.

4. Select the option recovery update from the application and when it ask for path guide it to the location where u copied the downloaded recovery file.

5. It will install and upon successfull installation it will ask you to reboot into recovery, select OK to go to newly insalled cwm recovery to confirm the installation.

6. If anything goes wrong you can download and install Stock Recovery For QMobile Noir A10 by using the above mentioned process again to revert back all the changes.

GPS Fix For QMobile Noir A10 for faster Lock

1. First of all you need a rooted QMobile Noir A10.

2. Download the modified gps.conf file from Here.

3. Browse to system/etc using root explorer and mount the system as read / write using the button present on top right of screen.

4. You will find a file gps.conf already present in the folder. Rename that file to gps.conf.bak, it will act as a backup for the original file.

5. Unzip the file you downloaded in Step 2, and copy the extracted gps.conf file to system/etc.

6. Reboot your Qmobile Noir A10.

7. Download GPS Test from Google Play Store and test your GPS now. (activate your gps first)

You will notice the improvement in getting GPS Lock Now.....

Enjoy............